LG 32VS10MN - Adjusting the OSD (On-Screen Display); Adjusting the Screen Automatically

26
User Menus
Adjusting the OSD (On-Screen Display)
• Use the remote control to adjust the OSD.
Adjusting the Screen Automatically
Press AUTO/SET (AUTO on the remote Control) when viewing a PC analog signal. The
optimal screen settings will be selected that suit the current mode. If adjustments are not
satisfactory, adjust the screen manually.
Pops up
the menu
screen
Move where
you want to
adjust
Move where
you want to
adjust
Select a
menu list
Select a
menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
MENU
➩ ➩ ➩ ➩
➩ ➩ ➩
Press MENU to bring up the OSD.
To access a control, use ∧∨.
To access a control, use ∧∨.
When the icon you want becomes highlighted, press OK.
When the list you want becomes highlighted, press OK.
Use ∧∨< > to adjust the item to the desired level.
Accept the changes by pressing OK.
Exit the OSD by pressing EXIT.
1
2
3
4
5
6
7
8
Auto in progress
Auto in progress
[When XGA mode is active and
1360 x 768 is selected.]
[When XGA mode is active and
1920 x 1080 is selected.]
< 32VS10MN >
< 42VS10MN, 47VS10MN >