ENGLISH
8
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the Stand
y
To protect the screen, place the screen face down
on the screen pad which is inside the box.
CAUTION
y
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
y
When tightening the screws after mounting
the stand base onto the stand body, be sure to
hold the stand base with your hand. Otherwise,
the product may fall, causing personal injury or
damage to the product.
y
Do not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
1
2
Stand Body
3
Stand Base
To Next Page
Loading...
