ENGLISH
9
ASSEMBLING AND PREPARING
Installing on a Table
1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm (4 inches) away from the wall to ensure suf-
ficient ventilation.
10 cm
10 cm (4 inches)
10 cm
10 cm
2
Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
y
Unplug the power cord before moving or install-
ing the monitor. There is risk of electric shock.
CAUTION
Cautions When Connecting Power Cord
100-240 V ~
y
Make sure to use the power cord that is pro-
vided in the product package and connect it to a
grounded power outlet.
y
If you need another power cord, please contact
your local dealer or the nearest retail store.
Adjusting the Stand Height
1
Place the monitor mounted on the stand base in
an upright position.
2
Push the head downward and pull out the
locking pin.
Head
Locking pin
To Next Page
Loading...
Need help?
General
