LG 47LT55A - User Manual

Questions and Answers

B
Beverly VincentAug 30, 2025
How to fix abnormal screen image on LG Digital Signage?
- C
  Christina ArmstrongAug 31, 2025
  If the screen image looks abnormal on your LG Digital Signage, and you are using a D-Sub analog signal, press the "AUTO" button on the remote control to automatically select the optimal screen status. If adjustment is not satisfactory, select [PICTURE] - [Screen] - [Position] in the OSD menu. Ensure the video card resolution and frequency are supported by the product, setting to the recommended resolution in the Control Panel "Display" Setting menu if necessary. You can also try adjusting the screen size and phase in the OSD menu under [PICTURE] - [Screen]. Finally, ensure the proper input signal is connected to the signal port.
J
Julie LutzSep 8, 2025
Why do black spots appear on the screen of my LG Monitor?
- A
  Alexandra CabreraSep 9, 2025
  If black spots appear on the screen of your LG Monitor, this may be due to several pixels (red, green, white, or black color) which is attributable to the unique characteristics of the LCD panel and is not a malfunction.
L
ltownsendAug 29, 2025
How to fix the audio on my LG 47LT55A Digital Signage?
- K
  keithrodgersAug 29, 2025
  If the audio function on your LG Digital Signage does not work, check if the audio cable is connected properly. Also, ensure that the volume is appropriately adjusted and the sound settings are correctly configured.
A
Andrew BrownSep 23, 2025
How to improve dull sound on LG Digital Signage?
- M
  Mary BrownSep 23, 2025
  If the sound from your LG Digital Signage is too dull, adjust the Clear Voice ll, Treble and Bass appropriately.
K
Kelly DuranSep 10, 2025
How to fix incorrect touch coordinates on my LG Monitor?
- D
  Dana WagnerSep 10, 2025
  To fix the issue where the location of a touch does not correspond to the touch coordinates on your LG Monitor, change your tablet PC settings if you are using Windows 7. If you are using Windows XP, change the display setting to Full Screen.
S
Shannon BeardSep 14, 2025
Why is touch location incorrect on LG Digital Signage?
- B
  Billy LewisSep 14, 2025
  If the location of a touch on your LG Digital Signage does not correspond to the touch coordinates, it may be that the touch screen is not calibrated properly. To resolve this, change your tablet PC settings (Windows 7) by going to Control Panel > Hardware and Sound > Tablet PC Settings > Display > Display options > Calibrate or Reset. Additionally, if using Windows XP, change the display setting to Full Screen. When using HDMI, set the Input Label to PC.
A
Alexis ReidSep 22, 2025
How to turn off 'Key Lock On' on LG 47LT55A?
- B
  Brandon GraySep 22, 2025
  If your LG Digital Signage displays a 'Key Lock On' message, the Lock function prevents the OSD settings from being changed inadvertently. To release the lock, go to Menu and Option and disable the Key Lock option.
S
Sherry CoxAug 27, 2025
Why is the screen color unstable on my LG Monitor?
- T
  Tiffany LiAug 27, 2025
  If the screen color on your LG Monitor is unstable or mono-colored, check the connection status of the signal cable. You can also try re-inserting the PC video card.
C
Catherine StanleyAug 26, 2025
Why does my LG Monitor's power suddenly turn off?
- M
  Michael CummingsAug 26, 2025
  If your LG Monitor suddenly turned off, check if the sleep timer is set. Also, examine the power control settings and ensure there were no power interruptions.
R
Richard LeAug 25, 2025
Why does the screen image look abnormal on my LG Monitor?
- H
  Hayden SmithAug 26, 2025
  If the screen image on your LG Monitor looks abnormal when using a D-Sub analog signal, press the "AUTO" button on the remote control to automatically select the optimal screen status. If the adjustment is not satisfactory, select [PICTURE] - [Screen] - [Position], [Size] or [Phase] in the OSD menu. Also, verify that the video card resolution and frequency are supported by the product. If the frequency is out of range, set it to the recommended resolution in the Control Panel "Display" Setting menu. Ensure the proper input signal is connected to the signal port by using a matching signal cable.