100
APPENDIX
APPENDIX
TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))
A
Press the VOLUME button.
A
Sound muted? Press MUTE button.
A
Try another channel. The problem may be with the broadcast.
A
Are the audio cables installed properly?
A
Adjust Balance in menu option.
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
A
Check HDMI cable over version 1.3.
A
Check USB cable over version 2.0.
Picture OK & No sound
Unusual sound from
inside the TV
No sound when
connecting HDMI or
USB
No output from one
of the speakers
A
Adjust resolution, horizontal frequency or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase or H/V position. (Option)
A
Check the signal cable.
A
Reinstall the PC video card.
The signal is out of range
(Invalid format)
Screen colour is unstable
or single colour
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
*This feature is not available for all models.
TThheerree iiss aa pprroobblleemm wwiitthh PPIICCTTUURREE sseettttiinnggss..
A
It means that the TV is currently set to
IInn SSttoorree
mode.
To switch to
HHoommee
mode you should do the followings:
From the TV Menu, choose
OOPPTTIIOONN
->
FFaaccttoorryy RReesseett
->
YY eess
(wait for a
few seconds for the TV to download again) -> OSD "
WWEELLCCOOMMEE
" appears ->
Press
OO KK
button -> Choose
LLaanngguuaaggee
-> Choose
HHoommee
-> Select your
CCoouunnttrryy
and
TTiimmee ZZoonnee
-> Press
OO KK
button. Program search will begin
automatically (You can stop the search by pressing the
OO KK
button). Now, you
have completed switching to the
HHoommee
mode.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
To Next Page
Loading...
Need help?
General
