52
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SOFTWARE UPDATE
* When setting “Software Update”
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
Select SETUP.
2
Select Software Update.
3
Select On or Off.
• If you select On, a user
confirm message box will be
displayed to notify that new
software is found.
4
Save.
SETUP
Move
OK
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
Software Update : Off
SETUP
Move
OK
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
Software Update : Off
1
Off
On
Off
Occasionally, a transmission of
updated digital software informa-
tion will result in the following
menu on the TV screen.
Select the
YY EE SS
using the
button and you will see the fol-
lowing picture.
After the Software Update is
complete, the System restarts.
When the Software Update
menu is "
OO ffff
", the message to
change it to "
OO nn
" appears.
When the power is turned off, downloading
starts.
When the power is turned on while updat-
ing, the progress status is displayed.
To Next Page
Loading...
Need help?
General
