ENGLISH
15
ASSEMBLING AND PREPARING
Mounting on a Table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
Do not place the TV near or on sources of heat, as this
may result in fire or other damage.
CAUTION
Securing the TV to a wall (optional)
1
Insert and tighten the eye-bolts, or TV brackets and bolts on
the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove
the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and the eye-bolts on
the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy
rope or cable.
Make sure to keep the rope parallel to the flat surface.
Make sure that children do not climb on or hang on the
TV.
CAUTION
Use a platform or cabinet that is strong and large enough
to support the TV securely.
Brackets, bolts, and ropes are optional. You can obtain
additional accessories from your local dealer.
NOTE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
