ENGLISH
29
MAKING CONNECTIONS
Connecting a PC
Use an HDMI connection for the best image quality.
Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present,
change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the
PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the next page.
When using the HDMI/DVI cable, only single link is supported.
If Ultra HD content is played on your PC, video or audio may become disrupted intermittently depending upon your PC’s
performance. (For 77EG970T)
NOTE
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HDMI Connection
HDMI
(*Not Provided)
PC
Choose any HDMI input port to connect.
It does not matter which port you use. (For 55EC930T)
HDMI
(*Not Provided)
PC
(For 55EC930T) (For 77EG970T)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
