30
ENG
ENGLISH
MAGIC REMOTE FUNCTIONS
Voice recognition
(Depending on model)
Network connection is required to use the
voice recognition function.
1 Press the Voice recognition button.
2 Speak when the voice display window
appears on the left of the TV screen.
• The voice recognition may fail when you
speak too fast or too slow.
• Use the Magic remote no further than 10
cm from your face.
• The recognition rate may vary depending
on the user’s characteristics (voice,
pronunciation, intonation and speed) and
the environment (noise and TV volume).
Registering Magic Remote
How to register the Magic Remote
(Wheel)
To use the Magic Remote, first pair
it with your TV.
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at your
TV and press the
Wheel (OK)
on the remote
control.
* If the TV fails to register the
Magic Remote, try again
after turning the TV off and
back on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the (
BACK
) and
(
Home
) buttons at the same
time, for five seconds, to unpair the
Magic Remote with your TV.
* Pressing and holding the
(
Exit to LIVE
) button will let
you cancel and re-register Magic
Remote at once.
How to use Magic Remote
y
Shake the Magic Remote
slightly to the right and left
or press (Home),
,
buttons to make the
pointer appear on the
screen.
»
The pointer will appear
when you turn the Wheel
button. (Depending on
model)
y
If the pointer has not been
used for a certain period
of time or Magic Remote
is placed on a flat surface,
then the pointer will
disappear.
y
If the pointer is not
responding smoothly, you
can reset the pointer by
moving it to the edge of
the screen.
y
The Magic Remote
depletes batteries faster
than a normal remote due
to the additional features.
To Next Page
Loading...
Need help?
General
