7
Installing on Wall
Installing the Product
Caution
• Disconnect the power cord first before moving or installing the product. There is risk of electric shock.
• Do not install the product on a ceiling or sloped wall. There is a risk of falling and injury.
• If you tighten the screws too tightly and damage the product, the warranty may not apply.
• Use screws and brackets for wall mounting that meet the VESA standard specifications. The warranty does
not apply to the breakage or personal injury due to the use of incorrect components.
• Using screws longer than VESA standard specifications when installing a wall mount support may damage
the interior of the product. In such cases, we do not take responsibility for any damage or issues that may
arise with the product.
Installing the Product
Allow at least 10 cm of clearance from the wall for ventilation, and install the product with care to prevent it from
falling. When purchasing a wall mount support, the installation guide and all necessary parts are included. A wall
mount support can be purchased separately from a nearby dealer.
10 cm
10 cm
10 cm
10 cm
10 cm