LG ACC75T Service Manual

Connections
(Continued)
Preparation
11
Speaker System
Connection
ote
If there is a
strong electromagnetic
wave
product
nearby,
an interference
may
be occurred.
(Ex
: Micro wave
oven)
Transmitter
Changing
a channel of Transmitter
If there is a similar wireless
product nearby,
interference
may
occur. In this
case,
change
to other channel
using
ID/CHANNEL
(ID./CH.)
button of transmitter.
Press the
ID/CHANNEL
(ID./CH.)
button
for
less
than about
3
seconds.
ote
The wireless
speakers may
not received the
changed
channel of
transmitter. In this case set the ID as below.
Setting
a
ID
of Transmitter
When
you
connect the wireless
speaker
for the first
time,
the blue and red LED indicator of wireless
speaker
blinks in turn and then the ID will be set
automatically.
If an interference is occurred or
you
use a new wireless
speaker,
set the ID.
1.
Press the
ID/CHANNEL
(ID./CH.)
button
for more
than about
3
seconds.
The blue LED indicator blinks.
2. Turn
the transmitter and wireless
speaker
off
and
then turn it
on.
Assembling
and
Connecting
to
the
Speakers
The front and rear
speakers
are detached from the
speaker
stands. Connect the
speaker
cords and assem-
ble the front and rear
speakers
from
speaker
stands as
illustrated.
Connect the
speaker
cords to the
appropriate
termi-
nals on the bottom of each front and rear
speaker.
After
connecting
the
speaker
cords to the
appropriate
terminals on the bottom of each front and rear
speak-
er and attach the front and rear
speakers
to the
speaker
stands.
ote
You cannot detach the
speaker
from the stand after assem-
bling
the front and rear
speakers.
LED
indicator
Displays
the
operated
status.
SIGNAL
ID./CH. DC IN
SOUND SIGNAL
connector
ID/CHANNEL
(ID./CH.)
button
DC IN connector

LG ACC75T Specifications

General

Brand	LG
Model	ACC75T
Category	Receiver
Language	English