LG ACC75T - Front Panel and Rear Panel; Front Panel Controls; Rear Panel Connectors

Connections
(Continued)
12
AUDIO
L
R
AV1 IN AV2 IN
Transmitter
DC
power
cable
Sound
signal
SIGNAL ID./CH. DC IN
Wireless
Speaker
(Right)
Center
speaker
Front
speaker
(Left)
Front
speaker
(Right)
Subwoofer
Wireless
Speaker
(Left)
cable
Speaker System
Connection
Speaker
Connections
Connect the
speakers
to the front
(right, left)
or center
speaker
connectors.
Connect the subwoofer to the woofer connector.
Connect the
power
cord of the wireless
speaker
to the outlet.
Connect the DC IN connector of transmitter and the transmitter connector of rear
panel
with the DC
power
cable.
Connect the SOUND SIGNAL connector of transmitter and the rear
(right, left) speaker
connector of rear
panel
with the SOUND SIGNAL cable.
Set the distance between the transmitter and wireless
speaker (right, left)
within 10m.
Notes:
Optimum performance
can be
implemented only
when the transmitter and the wireless
speaker
within distance of 2m
through
10m is used since communication failure
may
occur if
closely approaching
distance between them.
Be sure to match the
speaker
cable to the
appropriate
terminal on the
components:
+ to + and
--
to --. If the cables are
reversed,
the sound will be distorted and will lack base.
Do not remove the front cover of
supplied speaker.
It takes a few seconds
(and may
take
longer)
for the transmitter and wireless
speaker (left, right)
to communicate with each
other.
When the main set is turned
off,
the transmitter is also turned off
automatically
and the wireless
speaker
is in
standby
mode
(red
LED
indicator).
If the wireless
speaker
is turned
off,
the wireless
speaker
will not function.