LG CM24F - Wiring and Electrical Connections

THE INDOOR UNIT INSTALLATION
45
ENGLISH
Wiring Connection
* The feature can be changed according a
type of model.
* Pipes and wires should be purchased
separately for installation of the product.
- Open the control box cover and connect the
Remote controller cord and Indoor power
wires.
- Remove the control box cover for electrical
connection between the indoor and outdoor
unit. (Remove screws ①)
- Use the cord clamper to fix the cord.
Wiring Connection for Round Type
- Connect the wires to the terminals on the
control box individually according to the
outdoor unit connection.
- Ensure that the color of the wires of outdoor
unit and the terminal No. are the same as
those of indoor unit respectively.
- When connecting the wired remote
controller, remove the deco panel and pull
into the lower hole of the control box.
Control box
Control box cover
(On which the Electric
Wiring Connection is put)
1
1
Control terminal board
Remote controller cord
Connection cord between the indoor
unit and the outdoor unit
Ceiling Concealed Duct – Low Static, Mid Static
Remote
controller
cord
1
1
Connection
cord
between the
indoor unit and
the outdoor
unit
Control box cover
(On which the
Electric Wiring
Connection is put)
Remote controller cord
Transmission cord
Wired remote controller
connector
Indoor Unit
Outdoor Unit
Power supply