-13-
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
Maintenance
Cleaning
Before Cleaning
•
Never wash the following parts with water:
−
Nozzle
−
Rotating brush
−
Dust bin
•
The power button may be pressed and the product turned on. Always remove the
battery before cleaning the product.
•
Clean the filter periodically to maintain the normal suction power of the product.
•
If the suction power becomes weak or dust is filled to the max. fill line of the dust bin,
empty the dust bin.
Caution
•
Always install the exhaust filter and free filter into the vacuum body after cleaning them.
If you use the product without installing the filters, dust may get into the motor inside the
product and cause failure.
To Next Page
Loading...
