-9-
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
Before Use
Useful Information
Make sure that the exhaust filter or free filter is assembled correctly.
•
Make sure the dust bin lid is closed properly before use. If the dust bin lid is open, the
suction power will decrease, and it will affect the cleaning performance.
•
If foreign objects block the nozzle, expandable pipe or inlet, the product may not work
properly. Remove the following foreign objects before cleaning:
−
Foreign objects that may block the nozzle: Tissues, pantihose, plastic bags, etc.
−
Foreign objects that may degrade the performance: Small toys, toothpicks and cotton
swabs
•
Static electricity can be generated by the product body through environmental factors
such as temperature and humidity. If the problem persists, contact the LG Electronics
Service Centre.
•
When cleaning a high place, support the bottom of the product body with your hand.
•
Remove small stones, sands, fine dust, etc., from the brush of the nozzle to prevent a
coated floor from being scratched.
•
Follow the manufacturer’s recommendations when cleaning floors, carpets and rugs.
•
Do not clean a TV, LCD or monitor with a nozzle, because its surface may be scratched.
•
Do not vacuum large quantities of cookies or nutshells which are light in weight at the
one time.
•
For the following foreign objects, remove the nozzle or expandable pipe and adjust the
suction power to High or Turbo mode before cleaning them:
−
Heavy foreign objects, such as coins, screws and landscaping stones- Foreign
objects, such as beans, that can bounce off the rotating brush
•
For battery run times, refer to the product specifications in the user manual. Battery run
times may vary according to the mode used and the type of floor being cleaned.
To Next Page
Loading...
