-86-
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
Failures and measures
2. No dust emptying operation is carried out (3/3)
Check Point
Checkpoints
Measures
Suction motor
operation
(Operating time:
Approximately 30 seconds)
Dust canister
opening and closing
door operation
(Operating time -
Approximately 3 seconds)
Check the sealing
motor operation
(Operating time:
Approximately 7 seconds)
Does the suction motor operate?
(Check the operating sound,
approximately 15 seconds)
Is the dust canister cover
on the product body
closed correctly?
Is the opening and closing
door closed?
Does the sealing motor
unlock correctly?
(Operation to unlock the
product on both sides)
<Cover is closed> <Cover is open>
Check “4-7. The
suction motor
operation is faulty.”.
Check “4-6.
Opening and
closing door failure”.
Check the A9S
product body hook
failure.
Check “4-4. Sealing
motor operation
failure”.
An ending buzzer
sounds and the cycle is
completed normally.
No
No
No No
Yes
Yes
Yes
Yes
To Next Page
Loading...
