16
General Settings (Continued)
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT OUTPUT jacks,
but are connecting the recorder to a standard (analog)
television, set Progressive Scan to [OFF].
If you are using the COMPONENT OUTPUT jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
[ON].
Caution
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
recorder. First, remove the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
Power Save Mode
You can set up the unit into an economic power save
mode. Nothing is displayed in the display window
when the unit is turned off.
[OFF] Power Save Mode is not active.
[ON] Power Save Mode is active.
Note:
The Power Save Mode is not available in the standby
mode for the timer recording.
Factory Set
If you need to, you can reset the recorder to all its
factory settings. Select ‘‘ENTER’’ icon then press
ENTER, a menu appears with “Cancel”
highlighted.
Arrow left to highlight the “OK” then press ENTER and
auto setup menu will appear, see page 13.
Note:
Some options can not be reset. (Rating, Password)
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original] Refers to the original language in which
the disc was recorded.
[Others] To select another language, press number
buttons to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 42). If you make
a mistake while entering number, press CLEAR
repeatedly to delete numbers one by one then
correct it.
[OFF] (for Disc Subtitle) : Turn off Subtitle.
To Next Page
Loading...
Need help?
General
