6
Getting Started
Before you start using the phone, you may need to
insert the Micro SIM card.
Installing the Micro SIM card
The eject button is a small round aperture on the
tray door. To install a new Micro SIM card:
1 Insert the Micro SIM ejection tool that comes
with the phone (or a thin pin) into the eject button
aperture, and push firmly but gently until the tray
pops out.
Eject button aperture
2 Remove the tray and place the Micro SIM card inside
it (see image above). There is only one possible way
to fit the card snugly into the tray.
3 Carefully reposition the tray in the slot and push it
gently back into the phone.
NOTE
Make sure the gold contact area on the card is facing
downwards.
To Next Page
Loading...
