LG G3F-TC4A User Manual

Be sure to read carefully the safety precautions given in data sheet and user’s manual before operating the module
and follow them.
The precautions explained here only apply to the G3F-TC4A , G4F-TC2A andG6F-TC2A.
For safety precautions on the PLC system, see the GLOFA GM3/4 User’s Manuals, GLOFA GM6 User’s Manuals
or the MASTER-K 1000S/300S/200S User’s Manuals.
A precaution is given with a hazard alert triangular symbol to call your attention, and precautions are represented
as follows according to the degree of hazard.
However, a precaution followed with can also result in serious conditions.
Both of two symbols indicate that an important content is mentioned, therefore, be sure to observe it.
Keep this manual handy for your quick reference in necessary.
SAFETY PRECAUTIONS
WARNING
!
If not provided with proper prevention, it can cause death or fatal
injury or considerable loss of property.
CAUTION
!
If not properly observed, it can cause a hazard situation to resul
t
in severe or slight injury or a loss of property.
CAUTION
!
CAUTION
!
Design Precautions
▶
Do not run I/O signal lines and compensating wires near to high voltage line o
r
power line.
Separate them as 100 mm or more as possible.
Otherwise, noise can cause module malfunction.

LG G3F-TC4A Specifications

General

Brand	LG
Model	G3F-TC4A
Category	Controller
Language	English