Chapter 5. Programming
5 - 10
4) Program
Requests the execution of initialization function block so that the initialization
can be executed one time when the opposite station is normally operating.
Program for re-start after a power failur
has occurred during communications.
Reading Function block execution
request at every scan.
The opposite station
power failure information
If the power is restored
from fault
or power-off,
then it turns ‘on’.
On remains until a user
program turns it off.
If the temperature detected at the
channel 0 is negative, then %Q0.3.0
is turned on and the value is
converted into a positive number.
Converting the data type from INT
to BCD and outputting the valu
To Next Page
Loading...
Need help?
General
