EasyManuals Logo

LG HT353SD-A2 Service Manual

LG HT353SD-A2
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1-7
HOW TO UPDATE AUDIO MICOM & DVD PROGRAMS
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
1. How to update AUDIO MICOM program.
[Update using CD]
1. Change the filename to download as (MODEL NAME)_(Version).HEX. Only upper cases are permitted.
ex) HT353 : HT353_0709081.HEX
2. Copy the file to the root folder of a CD and burn it.
3. Insert the CD to the SET, and move to the DVD function. Then the upgrade process will be started with
the upgrade information.
4. If the upgrade process is complete, the set will be rebooted with Complete message.
[Update using USB]
1. Change the filename to download as (MODEL NAME)_(Version).HEX. Only upper cases are permitted.
ex) HT353 : HT353_0709081.HEX
2. Copy the file to the root folder of USB storage.
3. Put the USB into the SET, and move to the USB function. Then the upgrade process will be started with
the upgrade information.
4. If the upgrade process is complete, the set will be rebooted with Complete message.
2. How to update DVD program.
[Update using CD]
1. Rename the filename to download as TARGET.BIN in upper cases.
2. Copy the file to \MTK_UPG\ folder of CD, and burn it.
Ex) P:\MTK_UPG\TARGET.BIN
3. Insert the CD to the SET, then after a while the CD tray will be opened with upgrade information on the
screen.
4. Remove the CD, and press UP key in remote controller.
5. Remove and reconnect the power cable when it changes to logo screen from upgrade information. Then
the upgrade process is completed.
[Update using USB]
1. Rename the filename to download as TARGET.BIN in upper cases.
2. Copy the file to \MTK_UPG\ folder of the formatted USB, and burn it.
Ex) P:\MTK_UPG\TARGET.BIN
3. Move to the USB function, and insert the USB to the set. The upgrade information will be shown on the
screen.
4. Remove the USB, press UP key of the remote control.
5. Remove and reconnect the power cable when it changes to logo screen from upgrade information. Then
the upgrade process is completed.

Other manuals for LG HT353SD-A2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG HT353SD-A2 and is the answer not in the manual?

LG HT353SD-A2 Specifications

General IconGeneral
BrandLG
ModelHT353SD-A2
CategoryReceiver
LanguageEnglish

Related product manuals