Why is the DVD/CD Receiver audio CD indicator not working on my LG device?
If the power is on but the DVD/CD Receiver audio CD indicator does not work on your LG device, it could be because no disc is inserted. Insert a disc and check that the DVD or audio CD indicator in the DVD display is lit.
Why is the playback picture poor on my LG HT353SDW?
If the playback picture quality is poor on your LG Receiver, the disc might be dirty. Try cleaning the disc.
Why is my LG Receiver making a loud hum or noise?
If you hear a loud hum or noise from your LG Receiver, it could be due to: * A dirty disc. Clean the disc. * Poorly connected speakers and components. Connect the speakers and components securely. * The DVD/CD Receiver being too close to the TV. Move your TV away from the audio components.
What to do if my LG DVD/CD Receiver does not start playback?
If your LG DVD/CD Receiver does not start playback, here are some possible reasons and solutions: * No disc is inserted. Insert a disc and check that the DVD or audio CD indicator in the DVD display is lit. * An unplayable disc is inserted. Insert a playable disc, checking the disc type, colour system, and Regional code. * The disc is placed upside down. Place the disc with the playback side down. * The disc is not placed within the guide. Place the disc correctly on the disc tray inside the guide. * The disc is dirty. Clean the disc. * A menu is on the TV screen. Press the SETUP button to turn off the menu screen. * The Rating level is set. Cancel the Rating function or change the rating level.
What to do if my LG HT353SDW has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if my LG HT353SDW remote control does not work?
If the remote isn't working, first point it directly at the remote sensor on the receiver. Ensure you're within 23 ft (7 m) of the unit and that there are no obstacles blocking the signal. If it still doesn't work, replace the batteries with new ones.
How to adjust the front panel display brightness on LG HT353SDW?
To brighten the front panel display, press SLEEP(Dimmer) on the remote control.
Why won't my LG Receiver start playback?
If the receiver won't start playback, make sure a playable disc is inserted correctly (playback side down), and that it's placed within the guide on the disc tray. Also, ensure the disc is clean. If a menu is on the TV screen, press the SETUP button to turn it off. Finally, check if the Rating level is set and, if so, cancel the Rating function or change the rating level.
What to do if there is no sound from LG Receiver?
If you're experiencing no sound or very low sound, first ensure the equipment connected with the audio cable is set to receive DVD sound by selecting the correct input mode. Check that the audio cables are securely connected and that the connected equipment is powered on. If the problem continues, the audio connecting cable may be damaged, and you should replace it.
How to fix loud hum or noise from LG Receiver?
To address loud humming or noise, start by cleaning the disc. Also, ensure that the speakers and components are securely connected. If the issue persists, try moving the TV away from the audio components.
General| Type | Home Theater System |
|---|---|
| Number of Channels | 5.1 |
| DVD Player | Yes |
| Audio Formats Supported | Dolby Digital, DTS |
| Playback Media | DVD, CD, USB |
| Radio | FM |
| HDMI Inputs | 1 |
| USB Playback | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Video Formats | DivX, MPEG2 |
| Inputs | HDMI, USB |
| Outputs | HDMI |
| Connectivity | HDMI, USB |
To Next Page
