System Set-Up
Hydro Kit
Installation Manual 55
ENGLISH
※ short key
- Medium Temp. : CN_FLOW2
- High Temp. : Not Available
CAUTION
After adding brine(Anti-freeze) only the Water circuit can be set to Anti
Freeze mode. Otherwise the product may malfunction due to freezing
and bursting.
WARNING
Do not add brine(Anti-freeze) during Hot water mode.
!
!
x
: OFF
●
: On
Description
DIP switch setting
Function Default
1 2 3 4
Sensor
Selection
x
Sensor (Air) in Hydro Kit (RS3)
○
●
Air Sensor (PQRSTA0)
For High Temperature
Option Switch 3
x
: OFF
●
: On
Description
DIP switch setting
Function Default
1 2 3 4
Sensor Selection
x
Sensor (Air) in Hydro Kit (RS3)
○
●
Air Sensor (PQRSTA0)
Antifreeze
Operation mode
x
Not Use (connect short key)
○
●
Use (disconnect short key)
For Medium Temperature
Option Switch 3