63
Settings
01
02
03
04
05
06
07
08
09
10
Call waiting (Menu 9.5.4)
(network dependent)
v
Activate
If you select Activate, you can accept a
waiting (receiving) call.
v
Deactivate
If you select Deactivate, you cannot
recognize the waiting (receiving) call.
v
View status
Shows the status of Call waiting.
Minute minder (Menu 9.5.5)
If you select On, you can check the call
duration by a beep sound given every minute
during a call.
Auto redial (Menu 9.5.6)
v
On
When this function is activated, the phone
will automatically try to redial in the case of
failure to connect a call.
v
Off
Your phone will not make any attempts
to redial when the original call has not
connected.
Send DTMF tones (Menu 9.5.7)
You can send touch tones during an active
call to control your voice mailbox or other
automated phone services.
Security Menu 9.6
PIN code request (Menu 9.6.1)
In this menu, you can set the phone to ask
for the PIN code of your SIM card when the
phone is switched on.
If this function is activated, you will be
requested to enter the PIN code.
1 Select PIN code request in the security
settings menu, and then press OK.
2 Set On/Off.
3 If you want to change the setting, you need
to enter PIN code when you switch on the
phone.
4 If you enter wrong PIN code more than 3
times, the phone will lock out. If the PIN is
blocked, you will need to key in PUK code.
5 You can enter your PUK code up to 10
times. If you put wrong PUK code more
than 10 times, you can not unlock your
phone. You will need to contact your
service provider.
To Next Page
Loading...
Need help?
General
