7-7 Condenser Fan Error (CF E)
No
1
2
Checking flow
Reset the unit and
Input Test 1 Mode.
(Push the button 1 time)
Check the fan rotating.
※
While an error code is displayed,
the fan is not working.
3
Check the Fan motor and .surrounding
Rotate fan using your hand.
It feel sticky, change the motor.
Result & SVC Action
4
Below 7V
0 or 5 V
(2)~(3)
(1)~(3)
Change the PCB
Change the motor
Result SVC Action
Status
No windy
Windy
SVC Action
Check motor
Go to the 4
<Drawer Model>
<Swing Model>
1.- Check for loose connection in .
2-. Check condenser motor voltage.
CON7
(3)(2)(1)
(3)(2)(1)
23
To Next Page
Loading...
Need help?
General
