LG Low Ambient Control Kit - Page 20

Setting and Using Method
20 Low Ambient Control Kit
Damper
Actuator
IO Module
Transformer
Main PCB Power Module
AC 220V
BR
BL
WH
BK
RD
Terminal
Block
GR
GR
RD
WH
BK
RD
RD
BK
RD
Damper
Actuator
Notes
Damper Actuator can accept only DC 24V power input.
Do not input AC power. Otherwise it will cause a serious damage.
The IO Module can control maximum three actuators.
Case of one valve, the slave signal connecter must not use.
The power (AC/DC 24V) and signal(DC 0~10V) line is recommended by AWG22(1/32 in, (0.644 mm),
0.016 Ω/ft (0.053 Ω/m)).
2 Unit