18 Operation
Operation
4
Recording to TAPE
You can record a various sound source to TAPE.
1. Open the tape deck and then insert a blank
tape.
2. Select a function in which you want to
record.
3. Playback a sound source rst by using
PRESET + > on the unit or
B
/
X
on the
remote control.
4. Press R on the unit or
z
REC on the remote
control.
– The display changed in the following
order, “USB REC” <-> “TAPE REC”
5. Press the R on the unit or
z
REC on the
remote control button once more when
“TAPE REC” is displayed.
– Recording starts.
6. To stop recording, press STOP on the unit
or
x
on the remote control.
Synchronized Recording from
CD to Tape
1. Open the tape deck and then insert a blank
tape.
2. Close the door and insert a CD.
– Audio CD only
3. To select CD function, press CD on the unit
or FUNCTION on the remote control.
4. Press CD SYNC on a stop status to move to
CD synchronizing mode.
– The synchronized recording is started
automatically after about 7 seconds.
5. To stop, press STOP on the unit or
x
on the
remote control.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to
record playback a sound source rst.
One track recording - You can record to USB
after playing the le you want.
All tracks recording - You can record to USB
after stopping.
Program list recording - After moving to the
programmed list and you can record it to
USB.
3. Press R on the unit or
z
REC on the remote
control.
– The display changed in the following
order, “USB REC” <-> “TAPE REC”
4. Press the R on the unit or
z
REC on the
remote control button once more when
“USB REC” is displayed.
– Recording starts.
5. To stop recording, press STOP on the unit
or
x
on the remote control.
Pausing recording
During recording, press
z
REC (R) to pause
recording.
Press
z
REC (R) to continue recording.
(Only Radio/ AUX/ TAPE)
MCT435-AOU-SMEXCLK-ENG.indd 18MCT435-AOU-SMEXCLK-ENG.indd 18 2010.3.11 4:26:32 PM2010.3.11 4:26:32 PM
To Next Page
