LG PM12SP User Manual

19
EN
Heating Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Heating Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
NOTE
• will be displayed on the indoor unit when
defrosting is operating.
• Furthermore, this indication will be displayed
on the indoor unit:
− When preheating is operating.
− When the room temperature has been
reached to the set temperature.
Fan Mode
This mode only circulates the indoor air without
changing the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Fan Mode.
• is displayed on the display screen.
3
Press FAN SPEED button to adjust the fan
speed.
Using the Jet Mode Function
Changing Room Temperature
Quickly
This function allows you to cool indoor air
quickly during the summer or warm it quickly
during winter.
• The Jet Mode function is available with
Cooling, Heating and Dehumidification Mode.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
desired mode.
3
Press JET MODE button.
• is displayed on the display screen.
NOTE
• Jet Heating Mode is not available on some
models.
• In Jet Cooling Mode, strong air blows out for
30 minutes.
• After 30 minutes later, setting temperature is
maintaining 18 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
• In Jet Heating Mode, strong air blows out for
30 minutes.
• After 30 minutes later, setting temperature is
maintaining 30 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
• This function may operate differently from the
remote control display.

LG PM12SP Specifications

General

Brand	LG
Model	PM12SP
Category	Air Conditioner
Language	English