LG PM12SP - Using the Sleep Function (Optional); Using the Sleep Function; Using the Simple Timer Function (Optional); Using the Simple Timer Function

22
EN
Using the Sleep Function
(Optional)
This function turns off the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
• The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour
(up to 7 hours).
4
Press SET/CANCEL button to finish.
• is displayed on the display screen.
NOTE
• is displayed on some indoor units.
• Indoor unit display is displayed from 1H to 7H
which is displayed only 5 seconds and then
return to the setting temperature.
• In the Cooling and Dehumidification Mode, the
temperature increases by 1 °C after 30
minutes and additional 1 °C after another 30
minutes for a more comfortable sleep.
• The temperature increases up to 2 °C from
the preset temperature.
• Although the remark for fan speed on the
display screen may be changed, the fan
speed is adjusted automatically.
Using the Simple Timer
Function (Optional)
This function turns off the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
• The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour
(up to 7 hours).
4
Press SET/CANCEL button to finish.
• is displayed on the display screen.
NOTE
• This function is disabled when you set Off
Timer.