LG PM12SP - Using the Energy Display Function (Optional); Display the Current Energy Usage; Using the Light Off Function (Optional); Display Screen Brightness

23
EN
Using the Energy Display
Function (Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press
kW [3 s]
button and hold it about 3
seconds.
• The instantaneous power consumption (
) is displayed for a while on some
indoor units.
NOTE
• It is not displayed on the wireless remote
control.
• The unit of the displayed value is kW.
• If it is more than 99 kW, which is the range of
expression, maintain it as 99 kW.
• Display wattage under 10 kW with 0.1 kW
unit, and display one over 10 kW with 1 kW
unit.
• The actual power may differ from the power
displayed.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using the Light Off Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit
display screen.
• Press LIGHT OFF button.
NOTE
• Turn on/off the Display screen.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a
preset position to deflect the supply air away
from blowing directly onto the occupants in the
room.
1
Turn the appliance on.
2
Press COMFORT AIR button repeatedly
and select the desired direction.
• or is displayed on the display
screen.
NOTE
• or is displayed on some indoor units.
• This function is disabled when you press
MODE or JET MODE button.
• This function is disabled and auto swing of
vertical direction is set up when you press
SWING
button.
• When this function is off, the horizontal vane
operates automatically depending on the set
mode.