Assembly Diagram
Installation Manual 13
ENGLISH
Assembly Diagram - PRARS1
n Wall mounted & Art cool
Step1. Mount relay kit on the wall. Step2. Connect wires and assemble cover.
CAUTION
Do not install PRARS1 at,
-Places which exposed to rain or any water.
Other wise it may leads to electric shock, fire, injury or sometimes even fatality.
!
CAUTION
Auxiliary heater relay kit should be installed with in 3.3 ft from the product.
Otherwise heater may cause malfunction.
!
※
Wiring
Auxiliary Heater communication lines
(under AC24V,over AWG24)
These wires should not make
contact with high voltage lines.
To indoor unit PCB
(CN-PTC)
To Next Page
Loading...
