LG PRIP0 - Ceiling Suspended;Console Assembly

14 Independent Power Kit
Assembly Diagram
n Ceiling Suspended/Console
D < 1 000 mm
Wall Wall
Pipe
Step1. Mount independent power kit on the wall. Step2. Connect wires (use a piping or wiring hole) and
assemble cover.
Do not install PRIP0 at places exposed to rain or any water.
Otherwise it may leads to electric shock, fire, injury or sometimes even fatality.
Independent power kit should be installed within 1 000 mm which is length of the given wires.
Otherwise Indoor EEV may cause malfunction.
CAUTION
!
CAUTION
!