LG Pro:Centric 24LT572M - Page 13

13
206-4342
First Use Wizard (Cont.)
(Continued from previous page)
LG First Use Wizard
Welcome to the First Use Wizard
This wizard features two different setup options:
• The EXPRESS SCRIPT provides streamlined conguration of this TV for Free-To-
Guest (FTG) via CPU operation (including pillow speaker setup). The Express Script
also provides the option to congure the TV for Pro:Centric operation.
• The EZ-MANAGER provides automated or manual options for conguring
Pro:Centric operation. The EZ-Manager also provides the option to congure the TV
using a USB memory device.
Exit
EZ-Manager
Express Script
(FTG operation supports physical or logical tuning of clear and encrypted content channels.)
Select the desired option, or exit this First Use Wizard to perform a custom setup.
Use the arrow keys on the Installer Remote to select the desired option in the Welcome screen:
• To proceed with the EZ-Manager Wizard, select/highlight EZ-Manager, and then press OK.
Then, continue to the “EZ-Manager Wizard” section on pages 14 to 21.
• To proceed with the Express Script, select/highlight Express Script, and then press OK. Then,
continue to the “Express Script” section on pages 22 to 30.
• To exit the First Use Wizard, select/highlight Exit, and then press OK. In the conrmation pop-up
window, select OK, and then press OK once more on the Installer Remote.
Note: Both the EZ-Manager Wizard and the Express Script enable you to congure Pro:Centric
settings on this TV, even if you do not intend to congure any of the additional settings available.
After you congure the Pro:Centric settings, you will have the option to exit without completing the
remainder of the EZ-Manager Wizard or Express Script (as applicable), if desired.
Note: If you exit the First Use Wizard from this Welcome screen, no conguration will be performed
and all Installer Menu items will retain their default values, including Installer Menu item 119
DATA CHANNEL. The default DATA CHANNEL setting (255) means that the Pro:Centric remote
management feature on this TV will be activated if a Pro:Centric server is installed and the Data
Channel value is set during a Data Channel Auto Search (see item 119 description on page 45
for additional information). If you actually would like to disable the Pro:Centric feature, both the
EZ-Manager Wizard and the Express Script provide an option to do so, and/or you may disable
Pro:Centric by modifying the value of Installer Menu item 119.