LG Pro:Centric 24LT572M - EZ-Manager Wizard

14
206-4342
EZ-Manager Wizard
Initiate the EZ-Manager Wizard
After you select the “EZ-Manager” option from the First Use Wizard Welcome screen, an
EZ-Manager Welcome screen provides a brief introduction to the EZ-Manager Wizard.
Note: Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds
without user interaction. If the Pro:Centric server is congured on the system/network and if no
location-specic settings are required in the TV, for example, TV Zone, Label, and/or Room
Number settings, once initiated, the wizard will proceed through each of the conguration steps
with no further user interaction.
EZ-Manager Wizard
Welcome to LG’s EZ-Manager Wizard
• Use the EZ-Manager Wizard to congure the TV for Pro:Centric operation
or to congure the TV using a USB memory device.
Select ‘Next’ to continue.
• If a Pro:Centric Server will not be installed and/or you do not wish to use
the EZ-Manager Wizard to congure this TV, you may exit the wizard.
Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or
select ‘Exit’ to quit.
This wizard will start automatically in 10 seconds.
Exit
Next
No Pro:Centric
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
rst conguration step. Once the wizard has proceeded, it is not possible to return to the Welcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option
from the subsequent screen(s).
From the EZ-Manager Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select
Next, and then press OK. Then, continue to the “TV Conguration Options” section below.
• To exit the EZ-Manager Wizard, but retain the use of the Pro:Centric remote management
feature on this TV (i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use
the arrow keys on the Installer Remote to select Exit, and then press OK. In the conrmation
pop-up window, select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use
the wizard’s Zoning or USB conguration options, exit the wizard as follows: Use the arrow
keys on the Installer Remote to select No Pro:Centric, and then press OK. This will disable
the Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0)
and exit the wizard. In the exit conrmation pop-up window, select OK, and then press OK once
more on the Installer Remote.
TV Conguration Options
In the TV Conguration Options screen, you can choose how to proceed with the conguration of
this TV (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature on the TV for location-specic
conguration purposes, select the “Zone & Room Number” option from this screen
and set the appropriate TV Zone # in the TV BEFORE you continue with additional
conguration.
(Continued on next page)