LG Pro:Centric 24LT572M - Using the TV Zoning Feature

77
206-4342
Reference: Using the TV Zoning Feature
This section describes the TV Zoning feature available with the LT572M model TVs. The TV Zoning
feature enables you to create localized congurations for TVs in selected “Zones” within the installation site,
for example, a lobby area, tness center, restaurant, etc. This feature is primarily intended for use when
the TV is congured for FTG Mode via CPU operation. However, selected elements of TV Zoning (Installer
Menu and Setup Menu prole Zone assignments) may also be used with TV cloning processes using a
Clone (.tlx) le.
Refer to the appropriate section(s) below for further information on the TV Zoning feature and how to set
the TV Zone # in a TV that is currently in Pass-through Mode.
Note: Hospital Mode channel banks and Lodging TV Zoning are mutually exclusive features
of these TV models. The TV Zoning feature is only available when Hospital Mode is disabled
(i.e., Installer Menu item 027 HOSPITAL MODE is set to 0). For additional information, see
Channel Banks Overview” on pages 28 to 30.
Using the TV Zoning Feature with FTG Mode via CPU Conguration
The Cloud Conguration Tool may be used to create an FTG Conguration (.tlx) le that contains multiple
Installer Menu and Setup Menu proles, each with its own Zone assignment. Up to nine unique Zones
can be designated for LT572M FTG Installer Menu and/or Setup Menu proles. Zone restrictions can
also be placed on individual channels in the FTG Channel Map. Thus, for example, you may create an
FTG Installer Menu and/or Setup Menu prole to specically congure a TV in the tness center and also
restrict the channels that are available to be tuned on that TV.
The TV Zone # must be set appropriately on each TV in order for the TVs to be congured correctly. See
“Set the TV Zone # in the TV” on the following page, and set the TV Zone # in all the TVs in a select area,
so that the TVs are congured with corresponding FTG Installer Menu and/or Setup Menu settings and/or
can omit channels that have been restricted in the FTG Channel Map. TV Zone 0 is the default TV Zone #.
The following subsections briey describe how to assign Zones in the Cloud Conguration Tool. Refer to
the Cloud Configuration Tool User Guide for further information.
FTG Installer Menu Prole Zone Assignments
The Cloud Conguration Tool / Installer Menu web page enables you to create multiple Installer Menu
proles for the same chassis model, each with a different Zone assignment (default = Zone 0), to be
included in an FTG Conguration (.tlx) le. For example, you may wish to create one Installer Menu prole
for the LT572M TV in the the lobby area and another Installer Menu prole for the LT572M TV in the tness
center, both of which are different from the Installer Menu prole used for LT572M TVs in standard patient
rooms. The TV Zoning feature enables you to save multiple LT572M FTG Installer Menu proles, each with
its own Zone assignment, in one FTG Conguration (.tlx) le. If each TV in the aforementioned locations
(Zones) has had its TV Zone # set appropriately, as described in the procedure on the following page or
via the EZ-Manager Wizard, the TV(s) will only be congured by the Installer Menu prole that matches
its(their) Zone setting.
In the Cloud Conguration Tool / File Manager web page, you can also change the Zone assignment for
each Setup Menu prole already present in the FTG Conguration List. See the File Manager and Installer
Menu web page overviews on pages 59 and 62 for further information. Note that Setup Menu proles cannot
be created in the Cloud Conguration Tool; they must be saved (exported) from a TV.