LG Pro:Centric 24LT572M - Initial TV Configuration Wizards; First Use Wizard Overview

12
206-4342
The LG First Use Wizard, comprising EZ-Manager Wizard and Express Script configuration
options, will appear on the screen each time the TV is turned ON, until one of its configuration
methods has been completed or the wizard is exited. Use the Installer Remote to make selections
and complete each step.
• The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated
or manual) of conguring the essential Installer Menu items for Pro:Centric operation. However,
while intended primarily for Pro:Centric-related conguration, the EZ-Manager Wizard also
offers Zoning options. LT572M TVs support the (Lodging) TV Zoning feature, which enables
location-specic congurations. See Reference section, “Using the TV Zoning Feature,” for
further information. The EZ-Manager Wizard enables you to set the TV Zone # in the TV as part
of the conguration process.
The EZ-Manager Wizard also enables you to access the TV Manager / USB download options
as part of the conguration process, if desired, to perform USB conguration and/or update
functions. See “EZ-Manager Wizard” on pages 14 to 21 for further information.
• The Express Script guides you through the process of conguring the TV for FTG Mode via CPU
operation with Hospital Mode features. This includes setting up the pillow speaker, as required,
as well as setting up channel banks (up to four) for tiered channel programming. The Express
Script also enables you to congure the Pro:Centric settings on the TV. See “Express Script” on
pages 22 to 30 for further information.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the conguration process, as doing so will interrupt
the current step and may corrupt the conguration data.
Note: If you do not intend to complete the Express Script, but you wish to enable
Hospital Mode (pillow speaker functionality and also channel banks), you must set
Installer Menu item 027 HOSPITAL MODE appropriately. See the “Installer Menu”
section of this document for further information.
Before You Begin
• If you plan to create a customized Master TV Setup using the procedure described on pages 47
to 49, be sure to exit the LG First Use Wizard in order to avoid setup conicts or setting modes
that may cause unintended behavior or restrict the custom setup procedure. See also “Initiate
Conguration or Exit the LG First Use Wizard” below.
• If it has been completed or exited and therefore does not display, the First Use Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
Initiate Conguration or Exit the First Use Wizard
The Welcome screen provides a brief introduction to the First Use Wizard.
Note: Once you proceed with one of the conguration options, it is not possible to return to the
First Use Wizard Welcome screen; however, if you simply wish to exit the EZ-Manager Wizard or
Express Script (depending on your selection from the First Use Wizard Welcome screen), you can
do so by selecting the “Exit” button from the subsequent screen(s).
First Use Wizard
(Continued on next page)