LG Pro:Centric 24LT572M - Express Script

22
206-4342
Initiate the Express Script
Note: The Express Script congures the TV for FTG Mode via CPU operation with Hospital
Mode features. This means that while the TV is functioning in FTG Mode, Hospital Mode is enabled
(i.e., Installer Menu item 027 HOSPITAL MODE is not set to 0). In addition, you can create custom
channel lineups for Channel Banks 1 to 4.
Note: While the Express Script enables you to set up TVs individually in lieu of cloning, you can
also use the resulting Express Script TV Setup for cloning purposes, if desired. However, note that
TV setup menu customization via the Express Script is limited to Channel Menu options.
After you select the “Express Script” option from the First Use Wizard Welcome screen, an Express
Script Welcome screen provides a brief introduction to the Express Script.
Express Script
Welcome to LG’s Express Script
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
Exit
Next
OK
• Use the Express Script to congure the TV for Free-To-Guest (FTG) via CPU operation
(including pillow speaker setup). If a Pro:Centric server is installed, the Express Script also
enables you to congure the Pro:Centric settings on the TV.
Select ‘Next’ to continue.
• If you do not wish to use the the Express Script to congure this TV, you may exit the wizard.
Select ‘Exit’ to quit.
From the Express Script Welcome screen, you have the following options:
• To proceed with the Express Script, use the Left/Right arrow keys on the Installer Remote to
select Next. Then, press OK on the Installer Remote.
Note: Select this option even if you only intend to congure Pro:Centric settings on this TV.
After you congure the Pro:Centric settings, you will have the option to exit without completing
the remainder of the wizard, if desired.
• To exit the Express Script without completing any conguration, use the Up/Down arrow keys
on the Installer Remote to select Exit, and then press OK. In the conrmation pop-up window,
select OK, and then press OK once more on the Installer Remote.
Congure Pro:Centric Settings
The next screen enables you to congure the TV’s Pro:Centric server settings.
Express Script
Pro:Centric Configuration
Configuration Only
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
Auto Search
Data Channel
Pro:Centric Mode
Done
Next
OK
Exit
CC
Express Script
(Continued on next page)