LG Pro:Centric 24LT572M - USB Configuration

19
206-4342
EZ-Manager Wizard (Cont.)
(Continued from previous page)
4. Once all elds are completed as required, you have two options:
• To save the data entered and exit the wizard, use the arrow keys to select Exit and then press
OK. In the subsequent conrmation window, select Save and Exit, and then press OK once
more. The Pro:Centric application and/or E-Z Installation data will be downloaded to the TV at
a later time. This option is useful if the Pro:Centric server has not yet been congured.
• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the
arrow keys to select Next, and then press OK (see also note below).
Note: Pro:Centric server data must be present on the RF channel selected as the TV’s Data
Channel in order for you to select “Next” (you will see a “Data Channel Found” message below
the Signal Quality indicator).
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Conguration screen example on page 17). When the Pro:Centric conguration is complete, an
EZ-Manager Conguration Complete screen (see example on page 18) is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Conguration Complete screen on display, you also have the option to
manually turn off or reboot the TV. If desired, select Turn Off or Reboot, respectively, and then press
OK on the Installer Remote.
USB Conguration
TV Manager / USB download options enable you to download conguration, boot logo (splash
screen) image, or software les individually from a USB memory device to the TV. You can also use
the Ez Download utility available from the menu to select multiple types of les to be downloaded at
one time using one process.
Each of the USB download functions requires that you have the appropriate le(s) loaded on a USB
memory device. If you wish to perform a software update or download a boot logo, the software/
image le(s) must be stored in a folder named “LG_DTV” in the root directory of the USB device.
Clone/Conguration (.tlx) les should simply be stored in the root directory of the USB device.
The procedure below assumes that the desired le(s) is/are already loaded onto the USB device.
For further information on TV Manager / USB download options and le requirements, and/or for
information on creating Clone/Conguration (.tlx) les, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to set the appropriate TV Zone #
in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB
Conguration. See “TV Conguration Options” on pages 14 to 15 for further information.
Note: The TV Zoning feature is only available when Installer Menu item 027 HOSPITAL MODE
is set to 0 (i.e., Hospital Mode is disabled). See item 027 description on page 41 for further
information.
(Continued on next page)