20
206-4342
EZ-Manager Wizard (Cont.)
(Continued from previous page)
• Ensure the USB device to be used has been formatted with FAT format.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Ez Download Utility” on pages 31 to 34 for further information on the Ez Download
utility.
• Refer to “Custom Master TV Setup” on pages 47 to 49 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Conguration File” on pages 56 to 58 for information on
creating an FTG Conguration (.tlx) le for FTG Mode via CPU conguration.
• See Reference section, “Downloading a Boot Logo Image using a USB Memory Device,” for
boot logo image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
USB Conguration via EZ-Manager Wizard
With either the TV Conguration Options or the Zone, Label, and Room Number screen on display,
proceed as follows to congure the TV using the USB memory device.
1. Insert the USB memory device with the appropriate le(s) into the TV’s USB port.
2. Use the arrow keys on the Installer Remote to select USB Conguration, and then press OK.
You will be redirected to the TV Manager / USB download options.
Note: You can press on the Installer Remote at any time to return to the EZ-Manager Wizard.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB
Diagnostics
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
Back
OK
3. Select the appropriate option from the TV Manager, and initiate the desired download(s).
(Continued on next page)
To Next Page
Loading...
