LG Pro:Centric 24LT572M - Cloud Configuration Tool Overview; Creating an FTG Configuration File

56
206-4342
Cloud Conguration Tool Overview
As indicated in the introduction to this document, there are two separate and distinct methods for
configuring LT572M TVs for FTG Mode of operation: one method is to configure the TV CPU for FTG
Mode operation, while the other is to configure the TV EBL for FTG Mode operation. FROM A LOCAL
CONFIGURATION STANDPOINT, EACH OF THESE METHODS IS MUTUALLY EXCLUSIVE. IF THE
CPU IS IN FTG MODE, THE EBL CANNOT BE SWITCHED TO FTG MODE. LIKEWISE, IF THE EBL IS
IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE.
This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG
Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration
Tool using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox
®
47 or later.
Creating an FTG Conguration File
The subsections below briey describe how to use the Cloud Conguration Tool to create an FTG
Conguration (.tlx) le that can be used to congure the TV for FTG Mode via CPU. The Cloud
Conguration Tool provides options both for advanced and new users. If you are not familiar with the steps
to create an FTG Configuration file, you may choose a Wizard Setup that will guide you through the
process of creating a new file. Refer to the Cloud Configuration Tool User Guide for further information.
Note: There is also an option to save (export) conguration from a TV, which may be desirable or required
if you want to save customized TV setup menu settings to the FTG Conguration le and/or if you do not
know the RF channels at the site. See “ Exporting a Clone File ” on pages 50 to 52 for further information.
Access the Cloud Conguration Tool and Select a Setup Option
1. Launch a web browser, and navigate to the following URL: cct.procentric.tv.
2. On the Welcome web page, make sure North America (default) is selected in the Select Your Region
field, and then click on the SELECT button at the right of the field.
3. Once you select your region, you can choose the desired setup option, depending on your familiarity
with the utilities and/or your le requirements:
(Continued on next page)