32
206-4342
(Continued from previous page)
• If the wizard is displayed, you can access the Ez Download utility via the EZ-Manager Wizard,
as indicated above (see “Before You Begin”). However, to continue with this procedure and
access the Ez Download utility from the TV menus, exit the First Use Wizard. Then, continue
with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If the TV is currently in Pass-through Mode, you would like to transfer (import) a “.tlx” le to the
TV via the Ez Download utility, and you intend to use the TV Zoning feature, set the appropriate
TV Zone # in the TV at this time. See Reference section, “Using the TV Zoning Feature,” for
further information.
Note: In order for the proper TV Zone prole data to be applied, the appropriate TV
Zone # must be set in the Target TV BEFORE you continue with the Ez Download
utility.
4. Insert the USB memory device with the appropriate le(s) into the TV’s USB port.
5. To access the TV Manager from the TV menus:
• Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through
Mode) or the Function Menu (TV is not in Pass-through Mode).
• Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7”
key a total of seven times.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB
Diagnostics
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
Back
OK
6. If it is not currently selected, use the arrow keys to select Ez Download, and then press OK.
The Ez Download utility screen (see example below) contains a listing of the TLX (Clone/
Conguration) les stored in the root directory on the USB device and the CPU (EPK), PTC,
and LOGO (boot logo image) les stored in the LG_DTV folder.
Ez Download Utility (Cont.)
(Continued on next page)
To Next Page
Loading...
