51
206-4342
Cloning Procedures (Cont.)
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
5. To gain access to the “Export Clone File” option in the TV Manager, key in the following number
sequence on the Installer Remote: 9-8-7-6.
TV MANAGER
USB
Diagnostics
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
Export Clone File
Back
OK
6. Use the Up/Down arrow keys to select Export Clone File, and then press OK.
Clone le parameters will be displayed on the screen. See example below.
TV MANAGER
USB
Export Clone File
Select the filename, and press OK to start.
^
xxLT572M-UA00001.TLX
^
7. Modify the lename, as required. While the TV model element of the lename may not be
changed, you can differentiate this Clone le from other LT572M Clone les by changing the
numeric assignment appended to the end of the lename. Use the Up/Down arrow keys to
scroll through numeric assignments until the desired number is shown.
(Continued on next page)
To Next Page
Loading...
