LG RL2 User Manual

Getting Started10
Getting Started
1
Charging Battery
This unit has a built-in battery.
- By connecting AC power, battery will start
charging.
- If Battery charging indicator is in red, this means
that battery is charging now.
- If the battery charging indicator is in green,
this means that battery charging is completed.
For efcient performance of battery, it is
recommended fully charging the device until the
green LED goes off.
- Charge battery for about 9 hours before you start
using this unit for the rst time.
y
Operating time is approx. 15 hours. (Based
on fully charging the battery and continuous
playback using 50 % volume level.) It may
vary depending on the battery status and
operational conditions.
y
If you are listening to the music while
charging, it will take longer to charge.
y
Charge the battery fully during the
recommended time after discharge.
,
Note
Useful functions for using the unit
Function Description To do Do this
BT Lock On/Off
(Page 16)
It allows you to connect a
Bluetooth device only on
BT (Bluetooth) functions.
Initial setting of this function
was set to off.
ON
Press and hold
N
PRESET for 5 seconds in
BT (Bluetooth) function.
OFF
Press and hold
N
PRESET for 5 seconds in
BT (Bluetooth) function.

LG RL2 Specifications

General

Magnetically shielded	No
Woofer	Yes
Speaker type	-
Woofer diameter	165.1 mm
Tweeter diameter	20 mm
Number of drivers	2
Speaker placement	Floor
Audio output channels	- channels
Impedance	75 Ω
Sensitivity	87 dB
RMS rated power	35 W
Product color	Black, Red
Volume control	Rotary
Recommended usage	Stage
AC input voltage	100 - 240 V
DC input voltage	12 V
Power source type	AC, Battery
Power consumption (standby)	0.5 W
Power consumption (typical)	36 W
Headphone outputs	1
Connectivity technology	Wireless
Package depth	366 mm
Package width	440 mm
Package height	456 mm

Weight and Dimensions

Depth	292 mm
Width	353 mm
Height	420 mm
Weight	- g