Operating 19
Operating
3
Other Operations
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by pressing MIC VOL.
and rotating MASTER VOLUME / MULTI JOG
clockwise or counterclockwise.
y
When not using the microphone, set the
MIC volume to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
y
If the microphone is set too near the speaker,
a howling sound may be produced. In this case,
move the microphone away from the speaker
or decrease the sound level by pressing
MIC VOL.
and rotating
MASTER VOLUME / MULTI JOG
.
y
If sound through the microphone is extremely
loud, it may be distorted. In this case, press
MIC VOL.
and rotate
MASTER VOLUME / MULTI JOG
.
y
You can give an echo effect to the sound from
the microphones by pressing
MIC ECHO /
VOICE CANCELLER.
,
Note
VOICE CANCELLER
You can reduce the vocal tones during music playback
from various input sources.
Press and hold
MIC ECHO /
VOICE CANCELLER
and “ON - VOICE CANCELLER” will appear in display
window.
To cancel it, press and hold
MIC ECHO /
VOICE
CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music les.
y
This function is available in the USB or BT
(Bluetooth) Function.
y
If the function is not available, “NOT
SUPPORT” appears in the display window.
y
This function is available to use only when a
microphone is connected.
y
If a microphone is not connected, “INSERT
MIC” is scrolled in the display window.
y
It is not available on the mono source.
y
To initialize it, change the function or
disconnect the microphone.
y
This function may not be initialized depending
on the status of connected devices.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
