LG RL2 - Troubleshooting; General Troubleshooting Guide

4 Troubleshooting
Troubleshooting 23
Troubleshooting
4
Troubleshooting
General
Problem Cause & Solution
The unit does not work
properly.
y
Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplier, etc.) and turn them on again.
y
Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplier, etc.) and then try connecting again.
y
Previous setting may not be saved when device power is shut off.
y
Turn ON/OFF switch off (OFF) and on (ON).
No Power
y
The battery is discharged. Recharge the battery.
y
Check whether the ON/OFF switch is on (ON).
y
The power cord is not plugged in. Plug in the power cord.
y
Check whether electricity failed.
Check the condition by operating electronic devices using the same AC outlet.
No sound.
y
Check whether you select right function.
Press function button and check if you have selected the right function.
Radio stations cannot be
tuned in properly.
y
The antenna is positioned poorly.
Adjust the angle and direction for better reception.
y
The signal strength of the radio station is too weak.
Tune to the station manually.
y
No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 17 for details.
No speaker light
y
Check the light effects by pressing LIGHTING (Page 21).