LG RL2 User Manual

Operating14
Operating
3
Using BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
y
Available Devices : Smart phone, MP3, Notebook,
etc.
y
Version : 4.0
y
Codec : SBC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the
Bluetooth feature is activated on your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the unit.
When Bluetooth connection lock is activated,
you can search Bluetooth device in BT function.
,
Note
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG - RL2(XX)”.
y
XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG - RL2(08)” on your Bluetooth device.
y
Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
y
You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
y
The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specications.)
y
Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
,
Note

LG RL2 Specifications

General

Magnetically shielded	No
Woofer	Yes
Speaker type	-
Woofer diameter	165.1 mm
Tweeter diameter	20 mm
Number of drivers	2
Speaker placement	Floor
Audio output channels	- channels
Impedance	75 Ω
Sensitivity	87 dB
RMS rated power	35 W
Product color	Black, Red
Volume control	Rotary
Recommended usage	Stage
AC input voltage	100 - 240 V
DC input voltage	12 V
Power source type	AC, Battery
Power consumption (standby)	0.5 W
Power consumption (typical)	36 W
Headphone outputs	1
Connectivity technology	Wireless
Package depth	366 mm
Package width	440 mm
Package height	456 mm

Weight and Dimensions

Depth	292 mm
Width	353 mm
Height	420 mm
Weight	- g