LG RL2 User Manual

Operating 21
Operating
3
ECHO
When you connect your microphone to the MIC
jack, you can give an echo effect to the sound from
the microphones by pressing MIC ECHO / VOICE
CANCELLER.
ECHO 1 ECHO 2 OFF
y
If a microphone is not connected, “INSERT
MIC” appears in the display window.
y
If you press VOCAL EFFECTS button on
ECHO mode, afters backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
To operate ECHO mode, press
MIC ECHO /
VOICE CANCELLER again, after backing up
current VOCAL EFFECTS.
,
Note
LIGHTING
This function offers a party atmosphere by operating
the lighting on the unit.
To select mode, pressing LIGHTING repeatedly.
PARTY WATER FOREST OFF
y
Lighting function is available in all functions.
y
Lighting mode retains in its previous mode
when you first press LIGHTING, press again
to change modes.
y
Do not look directly at the light emitting part
when the LIGHTING is turned on.
y
If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING.
y
To turn off LED lightning, press and hold
LIGHTING for 3 seconds.
,
Note

LG RL2 Specifications

General

Magnetically shielded	No
Woofer	Yes
Speaker type	-
Woofer diameter	165.1 mm
Tweeter diameter	20 mm
Number of drivers	2
Speaker placement	Floor
Audio output channels	- channels
Impedance	75 Ω
Sensitivity	87 dB
RMS rated power	35 W
Product color	Black, Red
Volume control	Rotary
Recommended usage	Stage
AC input voltage	100 - 240 V
DC input voltage	12 V
Power source type	AC, Battery
Power consumption (standby)	0.5 W
Power consumption (typical)	36 W
Headphone outputs	1
Connectivity technology	Wireless
Package depth	366 mm
Package width	440 mm
Package height	456 mm

Weight and Dimensions

Depth	292 mm
Width	353 mm
Height	420 mm
Weight	- g