LG RL2 User Manual

Operating22
Operating
3
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turns itself off after six hours if
the main unit has been connected to another device
using the analog inputs.
Auto function change
This unit recognizes input signals such as
BT(Bluetooth) and AUX then automatically changes
to the suitable function.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected.
Play your music on the Bluetooth device.
When AUX IN (3.5 mm stereo cable) is
connected
When you connect the portable device to the
AUX IN connector, AUX function is selected.
Play your music on the portable device.
y
This function only works with devices that
were previously connected.
y
If the Bluetooth connection lock function
is set, Bluetooth connection will be only
available on Bluetooth function. (page 16)
,
Note

LG RL2 Specifications

General

Magnetically shielded	No
Woofer	Yes
Speaker type	-
Woofer diameter	165.1 mm
Tweeter diameter	20 mm
Number of drivers	2
Speaker placement	Floor
Audio output channels	- channels
Impedance	75 Ω
Sensitivity	87 dB
RMS rated power	35 W
Product color	Black, Red
Volume control	Rotary
Recommended usage	Stage
AC input voltage	100 - 240 V
DC input voltage	12 V
Power source type	AC, Battery
Power consumption (standby)	0.5 W
Power consumption (typical)	36 W
Headphone outputs	1
Connectivity technology	Wireless
Package depth	366 mm
Package width	440 mm
Package height	456 mm

Weight and Dimensions

Depth	292 mm
Width	353 mm
Height	420 mm
Weight	- g