Section 2A: Your Phone: The Basics 29
Using Speed Dialing
You can store up to 98 numbers in your phone‘s
speed dial memory. Dial speed dial entries using
one key touch for locations 2–9 or two key touches
for locations 10–99.
To use One-Touch Dialing for speed dial
locations 2–9:
v
Touch and hold the appropriate key for
approximately two seconds. The display
confirms that you have dialed the number
when it shows “Connecting...”.
To use Two-Touch Dialing for speed dial
locations 10-99:
1.
Touch the first digit.
2. Touch and hold the second digit for
approximately two seconds. The display
confirms that you have dialed the number
when it shows “Connecting...”.
Plus (+) Code Dialing
When placing international calls, Plus Code
Dialing automatically enters the international
access code for your location (for example, 011
for international calls made from the U.S.).
1. Touch and hold until you see a “+” on
the display screen.
2. Dial the country code and phone number,
and then touch Talk. The phone
automatically prepends the access code for
international dialing, followed by the country
code and phone number.
Phone Basics
To Next Page
Loading...
