Section 2A: Your Phone: The Basics 31
To enter a word using T9 Text Input:
1.
Select the
Predictive
text input mode.
2. Enter a couple of letters of a word. When you
enter a letter of a word, a small window will
appear and shows the words starting with the
letters. If you make a mistake, touch or
press to erase a single character. Touch
and hold or press and hold to
erase an entire word.
3. Touch and scroll to the desired word.
Then touch the desired word.
4. If a word you want to enter is not displayed in
the list, select Add Word? to add a word to
the Predictive Text Input database.
5. Enter the word and touch Done. The word will
appear as an option the next time you scroll
through options during Predictive Text Input.
For more information about Predictive Text Input,
visit the T9 Web site at www.T9.com.
ABC Mode (Touch Keypad Only)
In Abc mode, also known as multi-touch entry, you
touch keys one, two, three, or four times to enter
the letters you see on the keypad. For example,
touch once for “a,” twice for “b”, or three
times for “c”; or touch once for “p,” twice for
“q,” three times for “r,” or four times for “s.”
1. Select the Abc mode.
2. Touch the corresponding keys repeatedly
until the correct letter appears. (For example,
to enter the word “Bill,” touch twice,
three times, three times, and
three times again.)
If you make a mistake, touch to erase a
single character. Touch and hold to
erase an entire word.
By default, the first letter of an entry is capitalized
and the following letters are lowercased. You can
change the letter case using .
Phone Basics
To Next Page
Loading...
